PoE Injector 16/24 Port
" 16/24 Kanal Power over Ethernet injector Multi output gigabit PoE midspan POE-480 series are fully complaint to IEEE802.3af standards. Models with 16 or 24 ports are available (Please select on top). Each product can fully provide 15.4W per port over Cat5/Cat5e/ Cat6 cables for 10/100/1000 Base T systems, eliminating the need for power management and prioritization. The midspans have Cisco legacy detection without the need of external dongles, as well as an optional NIC interface. Each product is provided with a Phihong graphics user interface (GUI) for diagnostics or remote control via the USB port on the standard model. Anwendungen IP Telephones; Wireless Network Access Points Lighting Systems with Single UPS; Security Systems FEATURES Fully Compliant with IEEE802.3af 10/100/1000 base T compatible Full Power of 370-15,4W per port; Cisco Legacy detection Full Protection OTP, OCP, OVP; 48V RPS Input (optional) SAFETY Isolation Test Primary to Secondary: 4242VDC for 1min. 10mA, Primary to F.G.: 2121VDC for 1 minuteOutput to F.G.: 2121VDC for 1 minute Insulation Resistance Primary to secondary: >10M OHM 500 VDC, Primary to F.G.: >10M OHM 500 VDC INPUT AC Input Voltage Range 90 to 264 VAC Leakage Current 3.5 mA max @ 254 VAC 60 Hz AC Input Frequency 47-63 Hz AC Inrush Current 30A(RMS) max. for 115VAC/ 60A(RMS) max. for 230VAC AC Input Current 5.5A for 90VAC / 2.75A for 240VAC GENERAL Efficiency 75% (typical) at max. load and 120VAC 60Hz Hold-up Time 16mS min. 120VAC and max. load Transient O/P Voltage Protection 60V max. at switch on and off at any AC line Phase Turn-On Delay Time 3 sec max. at max. load, and 120VAC 60Hz, 25Hz USB Diagnostics Port USB ?B? port for diagnostics & manual port control Windows GUI Regulation Functional requirements of IEEE802.3af EMC Conducted & radiated Emission EN55022 Class A, FCC Class A with UTP Cabling EN55022 Class B, FCC Class B with FTP Cabling Immunity EN50082-1 ESD EN61000-4-2. Level 3 RS EN61000-4-3. Level 2 EFT EN61000-4-4. Level 2 Surge EN61000-4-5. Level 3 CS EN61000-4-6. Level 2 Voltage Dips EN61000-4-11 Harmonic EN61000-3-2 Class A ENVIRONMENTAL Temperature Operation 0 to +40°C, Non-operation -25 to +65°C Humidity Operation 5 to 90% Please choose your model via drop down menu on top!"